Bluetooth - Pioneer DMH-100BT Mode D'emploi

Top menu screen
21 48
6/10
Radio USB
Source icons
Setting the time and date (page 19)
Settings (page 14) and Favorite menu (page 18)
Hands-free phoning (page 8)
AV source off
If you select , you can turn off almost all functions.
The unit turns on by operating following functions:
• An incoming call is received (only for hands-free phoning via Bluetooth).
• A rear view camera image is input when the vehicle is in reverse.
• A button on this unit is pressed.
• The ignition switch is turned off (ACC OFF), then turned on (ACC ON).

Bluetooth

Bluetooth connection
1
Turn on the Bluetooth function on the device.
2
Press .
BluetoothAudio AUX Camera View
3
Touch then .
The Bluetooth menu screen appears.
4
Touch [Connection].
5
Touch .
The unit starts to search for available devices, then displays them in the device list.
6
Touch the Bluetooth device name.
After the device is successfully registered, a Bluetooth connection is established by the
system. Once the connection is established, the device name is displayed on the list.
NOTES
• If three devices are already paired, [Memory Full] is displayed. Delete a paired device first (page 8).
• If your device supports SSP (Secure Simple Pairing), a six-digit number appears on the display of this
product. Touch [Yes] to pair the device.
• is invalid when the device is already connected, during connection or disconnected.
• Before connecting from the Bluetooth device, make sure that the connection of this product and
other Bluetooth device is disconnected.
TIP
The Bluetooth connection can also be made by detecting this product from the Bluetooth device.
Before registration, make sure that [Visibility] in the [Bluetooth] menu is set to [On] (page 8). For details
on Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device.
Bluetooth settings
1
Press .
2
Touch then .
CAUTION
Never turn this product off and disconnect the device while the Bluetooth setting operation is being
processed.
7
En