Switching The Aux Mode (Aux); Setting The Dimmer (Dim); Selecting The Brightness (Bright) - Pioneer SuperTuner III DEH-P8200R Mode D'emploi

A Title (English)

Switching the AUX Mode (AUX)

It is possible to use auxiliary (AUX) equipment with this product.
Activate the AUX mode when using external equipment with this product.
1. Press the FUNCTION button and select the AUX Setting mode (AUX) in
the Initial Setting Menu.
2. Switch the AUX Setting
ON/OFF with the 5/∞ buttons.

Setting the Dimmer (DIM)

To enable this product's display from being too bright at night, when the vehicle's head
lights are turned ON the display is dimmed.
You can switch this function ON/OFF.
1. Press the FUNCTION button and select the Dimmer mode (DIM) in the
Initial Setting Menu.
2. Switch the Dimmer ON/OFF
with the 5/∞ buttons.

Selecting the Brightness (BRIGHT)

You can select the display brightness. Initially this mode is set to 12. The display shows
"0" – "15".
1. Press the FUNCTION button and select the Brightness mode (BRIGHT) in
the Initial Setting Menu.
2. Select the desired Brightness
with the 2/3 buttons.
48 49