Pioneer PRIEMIER SUPER TUNER III DEH-P920R Mode D'emploi page 56

Audio Adjustment
6. Enter the Auto-equalizing mode (Auto Equalizer).
Hold for 2 seconds
The front panel opens automatically.
7. Plug the provided microphone into the microphone input jack on this unit.
8. Start the Auto-equalizing.
9. Get out of the car and close the door within 10 seconds, if a 10-second count-
down starts.
The measurement tone (noise) is output from the speakers, and Auto-equalizing (acoustic
characteristics measurement and compensation) begins.
Note:
• When all speaker units are connected, Auto-equalizing is completed in about 7 or 8 minutes.
• To cancel Auto-equalizing part way through, press any button.
10. When Auto-equalizing is completed, a message is displayed as below.
When correct measurement of car interior acoustic characteristics is not possible, an error
message is displayed. (Refer to "Error Codes of Auto-equalizing Function" on the next
page.)
11. To cancel the Auto-equalizing mode, press any button.
55