Activating Internal Speaker On/Off; Speaker Volume Output Adjustment - Pioneer PRIEMIER SUPER TUNER III DEH-P920R Mode D'emploi

DFS Alarm Function

Activating Internal Speaker ON/OFF

This feature allows you to select whether or not the speaker output is sounded when the
"DFS Alarm" is triggered. Initially from the factory the speaker output is activated.
Toggling between 5, ∞ buttons allows you to deactivate or activate the "Speaker Output".
If you switch the speaker output OFF, you cannot change the "Test Mode".

Speaker Volume Output Adjustment

If the "Speaker Output" has been selected then it is possible to adjust the volume of the
speaker output for when the Alarm is triggered. To adjust the volume you must engage the
"Test Mode".
Note:
• If the "Speaker Output" is turned OFF, then this menu will not appear.
1. Select the "Test Mode" with
the 3 button.
2. Press the 5 button to switch
the "Test Mode" ON.
In this mode the speakers will
sound.
3. Decrease or increase the vol-
ume with the +/– button.
Display shows "10" – "40".
4. After setting volume, switch
the "Test Mode" OFF with the
∞ button.
5. Cancel the "Test Mode" with
the 2 button.
65