Dfs Alarm Function; Activating The Dfs Alarm Feature; Setting Entry Delay Time - Pioneer PRIEMIER SUPER TUNER III DEH-P920R Mode D'emploi

DFS Alarm Function

In addition to the Detachable Face Security, Pioneer has incorporated a new feature
"Detachable Face Security Alarm". This feature is designed to protect your new Pioneer
car stereo as well as your vehicle contents.

Activating the DFS Alarm Feature

Pioneer has developed a menu display that allows you to set-up your DFS Alarm to meet
your personal needs. By scrolling through this menu it is possible to select your own
"Entry Delay Time", "Speaker Output Volume", "Selectable Output", "Door System
Type", "Starter Disable" and "Remote Disarm".
Initially from the factory the DFS Alarm feature is not activated.
1. Select the DFS Alarm Feature
ON/OFF mode (DFS Alarm/
RFP Alert) in the Initial Setting
Menu. (Refer to page 59.)
2. Press the 5 button to switch
the DFS Alarm Feature ON.
Press the ∞ button to deactivate the
DFS Alarm Feature.
3. Press the FUNCTION button
for 2 seconds to enter the DFS
Alarm Setting Menu.

Setting Entry Delay Time

Initially the "Entry Delay Time" is set to 15 seconds. The "Entry Delay Time" can be
adjusted to be 0, 5, 15, 30, 45 or 60 seconds.
1. Decrease or increase the
"Entry Delay Time" with the
2/3 buttons.
2. Press the FUNCTION button
to move to the next selection.
65 64