Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connecting the Units
7 When using a Subwoofer without using a different amp (sold separately)
Front output
Refer to a Handsfree Telephone
unit's manual (sold separately).
IP-Bus input (Blue)
Antenna jack
This product
Multi-CD player
(sold separately)
IP-BUS cable
Subwoofer output
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
See the section "DFS Alarm
Installation".
Brown
White/yellow
Yellow
Fuse holder
To terminal always supplied
with power regardless of
ignition switch position.
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Orange
To lightnig switch terminal.
Black (ground)
To vehicle (metal) body.
Rear output
Blue/white
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Left
White
+
Front speaker
≠
White/black
Green
Green/black
Violet/black
Do not connect anything to these speaker leads.
Note:
Change the Initial Setting of this product.
(Refer to the Owner's Manual.)
<ENGLISH>
DFS Alarm Installation
CAUTION
• Because of the complexity of today's technically advanced vehicle wiring sys-
tems, we recommend that your DFS Alarm be installed ONLY by a professional
Pioneer installer.
Affix the included deterrent stickers to the inside of the front door windows.
Description
7 White/yellow (DOOR SWITCH) ........................................................................ (Fig. 4 & 5)
This lead is used to trigger DFS Alarm when any door is opened and may be connected to
either positive or negative (+/–) type door pin switches.
7 Brown (ALARM OUTPUT) ........................................................................................ (Fig. 6)
This lead is a pulsed positive (+) output capable of driving up to 2 relays (500 mA) max.
Use this lead to trigger relays for siren, horn, honk or flashing lights.
Door Switches
The DFS Alarm's door trigger input is designed to work with either positive or negative
Right
door pin switches. After hookup, simply set door system type from DFS Alarm Setting
Menu.
Gray
+
Domelight Delay-DFS Alarm will wait for last door to close and courtesy light to turn off
Front speaker
before Exit Delay Timer Starts.
≠
Gray/black
Violet
+
Subwoofer
≠
Fig. 3
<ENGLISH>
DOOR SWITCH (White/yellow)
Grounding Type Switch:
GM, Chrysler, Japanese, and most European vehicles.
Note:
• Set DFS Alarm to recognize ground trigger from DFS Alarm Setting Menu. Set Door System to
"Door-L :CLS".
This Product
Brown
(refer to "ALARM OUTPUT".)
White/yellow
Fuse holder
Dome light
Factory Door Switches
Fig. 4
Publicité
Table des Matières
