Spare Parts And Accessories - Emerson AVENTICS AV03 Instructions De Montage

Protection class according to EN
60529/IEC529
Protection class to control cabinet
Mounting orientation
Use
Pneumatics
Medium
Control pressure
Operating pressure
Operating pressure (UL/CSA applica-
tion)
Max. particle size
Oil content of compressed air
Media temperature
Nominal flow
Electrics
Electronics power supply
Valve power supply
Valve inrush current
Current at maximum configuration
(multipole)
Multipole plug (25-pin)
Rated current for both 24 V power
supplies (bus coupler)
Standards and directives
Specifications
DIN EN 60204-1 "Safety of machinery – Electrical equipment of machines – Part 1: General
requirements"
EN 61000-6-2 Electromagnetic compatibility (EMC) –
Part 6-2: generic standards – interference immunity for industrial areas
EN 61000-6-4 Electromagnetic compatibility (EMC) –
Part 6-4: Generic standards – Emission standard for industrial environments
DIN EN ISO 4414 Pneumatic fluid power - General rules and safety requirements for systems
and their components
• Only use PELV electric circuits in accordance with EN 60204-1.
• Always establish the power supply using a safety isolation transformer in ac-
cordance with IEC 61558-1/IEC 61558-2-6 (EN 61558-1/EN 61558-2-6). Equiv-
alent solutions are permitted.
• Make sure that the supply voltage for the power pack is always less than
300 V AC.
This section contains an excerpt of the key technical data. Further technical data
can be found in our online catalog at www.aventics.com/pneumatics-catalog.

13 Spare parts and accessories

Information on spare parts and accessories can be found in the online catalog at
www.aventics.com/pneumatics-catalog.
AVENTICS™ AV03/AV05 | R412018507-BAL-001-AK | English
Specifications
IP65 with assembled connections
IP40 with single wiring
IP54 with direct connection
IP65 with transition plate
Any
Only in closed rooms
Specifications
Compressed air
3 bar/8 bar
-0.9 bar/10 bar
-0.9 bar/8 bar
40 µm
3
0 – 5 mg/m
–10 °C to +60 °C
AV03: 300 l/min; AV05: 700 l/min
Specifications
24 V DC ±25 %
24 V DC ±10 %
50 mA
24 x 50 mA
40 x 50 mA
Maximum 24 coils
4 A
34