Philips GC4800 Série Mode D'emploi page 21

Problem Possible cause
Water drips You have put the iron
from the in horizontal position
soleplate after with water still left in
the iron has the water tank.
cooled down
or has been
stored.
Flakes and Hard water forms
impurities flakes inside the
come out of soleplate.
the soleplate
during ironing.
The red The automatic
light flashes shut-off function has
(specific types switched off the iron
only). (see chapter 'Features',
section 'Automatic
shut-off function').
The iron The Ionic DeepSteam
makes a function is on.
humming
sound.
The humming The sound stopped
sound stops, because you placed
although the iron on its heel.
the Ionic
DeepSteam
function is on.
Solution
Empty the water tank.
Use the Calc-Clean function one or
more times (see chapter 'Cleaning
and maintenance', section 'Using the
Calc-Clean function').
Move the iron slightly to deactivate
the automatic shut-off function. The
red auto-off light goes out.
If you hear the humming sound when
you iron without steam, press the
Ionic DeepSteam button to switch
off the Ionic DeepSteam function.
The Ionic DeepSteam function has no
effect when you iron without steam.
The humming sound resumes as soon
as you continue to iron.
EnGlish
21