Philips GC4800 Série Mode D'emploi page 11

If you do not know what kind or kinds of fabric
an article is made of, determine the right ironing
temperature by ironing a part that is not visible
when you wear or use the article.
Silk, woollen and synthetic materials: iron the reverse
side of the fabric to prevent shiny patches. To
prevent stains, do not use the spray function.
Start ironing the articles that require the lowest
ironing temperature, such as those made of synthetic
fibres.
4 Set the appropriate steam setting (see the
'Temperature and steam settings' table above).
Note: Make sure that the steam setting you select is
suitable for the set ironing temperature.
5 Put the mains plug in an earthed wall socket.
, The amber temperature light goes on.
6 When the amber temperature light has gone
out, wait a while before you start ironing.
, The temperature light goes on from time to
time during ironing.
using the appliance
Note: The iron may give off some smoke when you use
it for the first time. This ceases after a short while.
ironing without steam
1 Set the steam control to position 0 (= no
steam).
2 Set the required ironing temperature (see
chapter 'Preparing for use', section 'Selecting
the temperature and steam setting').
EnGlish
11