Philips GC4800 Série Mode D'emploi page 17

5 Put the plug in an earthed wall socket.
6 Unplug the iron when the temperature
light goes out.
7 Hold the iron over the sink, press and hold the
Calc-Clean button and gently shake the iron to
and fro.
, Steam and boiling water come out of the
soleplate. Impurities and flakes (if any) are
flushed out.
8 Release the Calc-Clean button as soon as all
the water in the tank has been used up.
9 Repeat the Calc-Clean process if the iron still
contains a lot of impurities.
after the Calc-Clean process
1 Put the plug back into the wall socket and let
the iron heat up to let the soleplate dry.
2 Unplug the iron when it has reached the set
ironing temperature.
3 Move the hot iron gently over a piece of used
cloth to remove any water stains that may have
formed on the soleplate.
4 Let the iron cool down before you store it.
storage
1 Set the steam control to position 0 and unplug
the iron.
2 Empty the water tank.
3 Let the iron cool down in a safe place.
EnGlish
17