Usage; Safety Information; Controlling The Bath Lift - Invacare Aquatec R Manuel D'utilisation

5 Usage

5.1 Safety information

CAUTION!
Overloading the bath lift can lead to damage to the
device or prevent lifting.
– Do not overload the bath lift and observe the
specifications on the identification label and 10.1
Dimensions and weight, page 21 with regard to its
load capacity.
IMPORTANT!
– Always perform a visual inspection of the product for
external damage before each use.
– Recharge the battery completely before each use.

5.2 Controlling the bath lift

The bath lift can be moved in the following directions:
The bath lift is controlled via the hand control.
With a fully charged battery, the Aquatec® R and F can
perform 5 bathing operations with a load of 140 kg. The XL
can perform 4 bathing operations with a load of 170 kg.
1471194-A
A
B
C
E
D
IMPORTANT!
Risk of damage
– The hand control may only be used when the backrest
is properly installed and in the upright position.
IMPORTANT!
If the battery in the hand control C is not sufficiently
charged, the red indicator lamp E lights up red when the
Down button D is pressed. In this case, the lowering
function of the bath lift is disabled. You can however
still raise the lift.
– Recharge the battery immediately after raising it.
Raising the bath lift
IMPORTANT!
If the backrest is lowered, it will move into the upright
position first (not on model F).
Press the Up button B on the hand control and keep it pressed.
1.
The backrest moves into the upright position or the seat moves
upwards.
2. Release the Up button on the hand control.
The bath lift stops in the current position.
Usage
13