Operation; Main Unit Operation - Sharp FU-Y30EU Manuel D'utilisation

OPERATION

MAIN UNIT OPERATION

Fan Speed Indicator Lights
Plasmacluster Indicator Light
LOW operation
The unit will operate
quietly using minimal
air intake.
FU-Y30EU̲eng.indd 10 FU-Y30EU̲eng.indd 10
Power ON/OFF Button
• Press to start operation (short beep) and stop operation
(long beep)
• Plasmacluster Indicator Light and Fan Speed Indicator
Light turn on/off.
• Unless the power cord has been unplugged, the opera-
tions starts in the previous mode it was operated in.
MODE Button
• Press the MODE Button to select the desired fan speed.
Indicator Lights will show the fan speed currently select-
ed.
• The operation mode can be switched as below.
MEDIUM operation
The unit will operate at a
fan speed of MEDIUM.
Plasmacluster Ion ON/OFF Button
Press the Plasmacluster Ion ON/OFF Button to turn
Plasmacluster Ion Mode ON and OFF.
When Plasmacluster is ON, the Plasmacluster Indica-
tor Light will turn on.(blue)
E-8
MODE Button
Plasmacluster Ion ON/OFF
Button
POWER ON/OFF Button
MAX operation
The unit will operate at
a fan speed of MAX.
2009/09/10 14:36:17 2009/09/10 14:36:17