Operation Of The Induction Burner; Cooking With The Timer - Unold 58265 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23

OPErATION OF THE INDUCTION bUrNEr

The double induction cooker features two separate burners which can be operated independently of
each other. The left burner can be operated at maximum power of 1,800 watts and the right burner
at a maximum power of 1,600 watts. If you use the temperature control, the maximum possible
temperature for each side is 240°C.
1. Plug the power cord into an electrical outlet.
A signal tone confirms that the appliance
has been switched on and the display lights
up. Then both displays show – – to indicate
that the appliance is connected to the power
supply.
2. Place a suitable pot with food to be cooked
in the middle of the burner.
3. Press the ON/OFF button. The display shows
00 00.
4. Press
the
FUNCTION
5 seconds. If you wait longer, you will have
to switch on the appliance again with the
ON/OFF button.
5. You can control the appliance either by the
heating power or the temperature. Press
the FUNCTION button to switch between
the two modes. The power and temperature
setting can be changed at any time during
cooking by pressing the Plus or Minus
button.
6. heat control: Press the Function button
until the indicator lamps "W" and "Cook"
light up. The fan starts turning at the same
time. The standard setting for the left
burner is 1,800 watts and for right burner
1,600 watts. You can change these settings
with the Plus and Minus buttons. The
following power levels are available:
Left
Right
400 W
400 W
800 W
800 W

COOKINg wITH THE TImEr

This function makes it possible to program the appliance so that it automatically switches off after
a specified time.
1. First, select the desired function as descri-
bed above (Heat or Temperature).
2. Press the "Time" button once. The display
shows "00:00".
18
button
within
application
Keep warm,
steep
Cook gently
Left
Right
1.000 W 1.000 W
1.200 W 1.200 W
1.400 W 1.400 W
1.600 W 1.600 W
1.800 W
7. temperature control: Press the Function but-
ton until the indicator lamps "C" and "Keep
warm" light up. The fan starts turning at the
same time. The standard setting for both
burners is 240°C. You can change this set-
ting with the Plus and Minus buttons. The
following temperature levels are available:
Level 1
Level 2
100 °C
Level 3
140 °C
Level 4
180 °C
Level 5
220 °C
Level 6
240 °C
8. If there is no pot on the burner, a signal tone
sounds at intervals, the display shows E 0
and the appliance automatically switches
off after 60 seconds.
3. Now press the Plus or Minus button within
five seconds to enter the desired time. The
maximum number of hours that can be set
is 23 hours. Enter the minutes following the
application
Brown
gently and
fry
Brown
gently and
fry
Brown / fry
Brown
quickly
Grill
60 °C
Keep warm
Cook gently
Fry gently
Fry / brown
Grill
Grill

Publicité

Table des Matières
loading

Table des Matières