English - Bosch GAM Professional 220 Notice Originale

Schweiz
Unter www.bosch-pt.com/ch/de können Sie online Ersatzteile bestellen.
Tel.: (044) 8471511
Fax: (044) 8471551
E-Mail: Aftersales.Service@de.bosch.com
Entsorgung
Messwerkzeuge, Akkus/Batterien, Zubehör und Verpackungen sollen einer
umweltgerechten Wiederverwertung zugeführt werden.
Werfen Sie Messwerkzeuge und Akkus/Batterien nicht in den
Hausmüll!
Nur für EU-Länder:
Gemäß der europäischen Richtlinie 2012/19/EU müssen nicht mehr ge-
brauchsfähige Messwerkzeuge und gemäß der europäischen Richtlinie
2006/66/EG müssen defekte oder verbrauchte Akkus/Batterien getrennt
gesammelt und einer umweltgerechten Wiederverwendung zugeführt wer-
den.

English

Safety instructions
All instructions must be read and observed. The safe-
guards integrated into the measuring tool may be com-
promised if the measuring tool is not used in accord-
ance with these instructions. STORE THESE INSTRUC-
TIONS IN A SAFE PLACE.
Have the measuring tool serviced only by a qualified specialist using
u
only original replacement parts. This will ensure that the safety of the
measuring tool is maintained.
Do not use the measuring tool in explosive atmospheres which con-
u
tain flammable liquids, gases or dust. Sparks may be produced inside
the measuring tool, which can ignite dust or fumes.
When sawing workpieces for which you have determined the angle
u
using this measuring tool, always strictly follow the safety instruc-
tions and working advice for the saws in use (including instructions
on positioning and clamping the workpiece). When the required angles
cannot be set on a certain saw or saw type, alternative sawing methods
will need to be applied. Extremely acute (sharp) angles can be cut using a
taper jig with a table saw or a circular saw.
Product Description and Specifications
Please observe the illustrations at the beginning of this operating manual.
Intended Use
GAM 220
The measuring tool is intended for measuring and transferring angles (hori-
zontal and vertical), e.g. for customisations in interior finishing work, in
staircase construction or on exterior panelling.
The measuring tool is suitable for indoor and outdoor use.
GAM 220 MF
The measuring tool is intended for measuring and transferring angles and for
calculating simple and compound mitre/bevel angles.
The measuring tool is suitable for indoor and outdoor use.
Product Features
The numbering of the product features shown refers to the illustration of the
measuring tool on the graphic page.
(1) Fold-out leg
(2) Viewing window for display
(3) Locking wheel
(4) Base leg
(5) Battery compartment cover
(6) Battery compartment cover locking mechanism
(7) Display
(8) Level for horizontal alignment
(9) Level for vertical alignment
(10) Serial number
(11) Button Hold
(12) On/off button
(13) Button for rotating the display
(14) Button MTR1 for simple mitre (GAM 220 MF)
Bosch Power Tools
English | 13
1 609 92A 58K | (18.11.2019)