Assembly - Active E700 Manuel D'instruction

HANDLE ASSEMBLY (L) Fig 1
Remove screws (1) and widen handle (2) to insert it into the
tube (3) and fasten it with screws (1) and nuts (4). Position
the safety bar (5) in its housing and fasten with the screw
(6), the washer (8) and the nut (7). The handle position is
adjustable for operator needs.
4
7
CONNECTING THE BATTERY TO THE HARNESS Fig. 2
Connect the battery to the harness by means of the 3 hook
ends (B). Insert the hook (B) in its housing (A) and lock in,
turning it 90° clockwise.
A
B

6. ASSEMBLY

FIG . 1
3
1
2
6
5
8
FIG . 2
A
B
CONNECTION CABLE TO MOTOR Fig. 3
1)
Turn the sleeve counterclockwise (B);
2) Insert the sleeve (B) into (A);
3) Turn clockwise the sleeve (B) to lock it;
CONNECTING THE MACHINE TO THE BATTERY AND
START-UP Fig. 4-5
ACTIVE
Only use original
(A) to the battery connector (B) and lock in, turning the ring
(C) 90° clockwise. Turn the switch to position (1) Fig. 5 Make
sure that the LED on the motor is on and first press the
safety lever (4) and then the accelerator lever (2).
LED COLOUR ON
THE MOTOR
Green
Green / Yellow
Yellow / Red
Red
19
GB
ENGLISH
FIG . 3
batteries. Connect the motor cable
FIG . 4
A
B
C
BATTERY STATUS
Battery charge from 100% to 80%
Battery charge from 80% to 50%
Battery charge from 50% to 20%
Battery charge from 20% to 0%