Model Designation; Specifications; Plug Configurations; Electrical Rating Chart - Hatco Thermo-Finisher TFWM Série Manuel D'installation Et D'utilisation

English
Thermo-finisher
Wall Mounted
Width of Unit (inches)

Plug Configurations

Some units are supplied from the factory with an electrical
cord and plug installed. Plugs are supplied according to the
application.
WARNING
ELECTRIC SHOCK HAZARD:
• Plug unit into a properly grounded electrical receptacle
of the correct voltage, size, and plug configuration. If
plug and receptacle do not match, contact a qualified
electrician to determine and install the proper voltage
and size electrical receptacle.
• Units supplied without an electrical cord and plug
require a hardwired connection to the on-site electrical
system. Connection must be properly grounded and
of the correct voltage, size, and configuration for the
electrical specifications of the unit. Contact a qualified
electrician to determine and install the proper electrical
connection.

Electrical Rating Chart

Model Voltage
TFWM42-3900
208
240
TFWM42-3939 208
240
TFWM36-3900
208
240
TFWM36-3939 208
240
Form No. TFWMM-0817
T F W M x x - x x x x
Phase Watts
1
7200
3
1
7500
3
14400
3
15000
1
7200
3
1
7500
3
14400
3
15000
Size of Lower Heating Elements
(diameter in inches)
Quantity of Lower Heating Elements
Size of Upper Heating Elements
(diameter in inches)
Quantity of Upper Heating Elements
NOTE: Receptacle not supplied by Hatco.
NOTE: Specification label located on the side of the unit. See
label for serial number and verification of unit electrical
information.
Plug
Amps Configuration
34.6 NEMA 6-50P or Hardwired
20.0 NEMA L15-30P or Hardwired
31.3 NEMA 6-50P or Hardwired
18.0 NEMA L15-30P or Hardwired
40.0
Hardwired
36.1
34.6 NEMA 6-50P or Hardwired
20.0 NEMA L15-30P or Hardwired
31.3 NEMA 6-50P or Hardwired
18.0 NEMA L15-30P or Hardwired
40.0
Hardwired
36.1
5

MODEL DESIGNATION

SPECIFICATIONS

Plug Configurations
Shipping Weight
166 lbs. (75 kg)
181 lbs. (82 kg)
156 lbs. (71 kg)
171 lbs. (78 kg)