Bosch GCO 14-24 J Professional Notice Originale page 17

Symbols and their meanings
Wear protective gloves. Cutting discs
have sharp edges and become very hot
during operation.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is a stationary machine that uses cutting
discs to cut metal materials with and against the grain, in
straight lines and at mitre angles up to 45°, without the use
of water.
Using diamond-tipped cutting discs is not permitted.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Lock-off button for on/off switch
(2) On/off switch
(3) Handle
(4) Retracting blade guard
(5) Spindle lock
(6) Cutting disc
(7) Angle guide
(8) Locking spindle
(9) Quick release
(10) Spindle handle
(11) Mounting holes
(12) Hex key (8 mm)
(13) Base plate
(14) Clamping jaw
(15) Workpiece support for workpieces with cross sec-
tion of max. 40 x 40 mm
(16) Locking screw for angle guide
(17) Transport safety lock
(18) Tool arm
(19) Transport handle
(20) Protective guard
(21) Spark guard plate
(22) Tool spindle
(23) Clamping flange
Bosch Power Tools
(24) Washer
(25) Hexagon screw
Technical Data
Cut-off grinder
Article number
Rated power input
No-load speed
Soft start
Weight according to EPTA-
Procedure 01:2014
Protection class
Permitted workpiece dimensions (maximum/minimum): (see "Per-
missible workpiece dimensions", page 20)
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Dimensions of suitable cutting discs
Max. cutting disc diameter
Max. cutting disc thickness
Hole diameter
Noise Information
Noise emission values determined according to
EN 62841-3-10.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 101 dB(A); sound power level
112 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
The noise emission value given in these instructions has
been measured in accordance with a standardised measur-
ing procedure and may be used to compare power tools. It
may also be used for a preliminary estimation of noise emis-
sions.
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used
for other applications, with different application tools or is
poorly maintained, the noise emission value may differ. This
may significantly increase noise emissions over the total
working period.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually be-
ing used, should also be taken into account. This may signi-
ficantly reduce noise emissions over the total working
period.
Assembly
Avoid starting the power tool unintentionally. The
u
mains plug must not be connected to the power supply
during assembly or when carrying out any kind of
work on the power tool.
English | 17
GCO 14-24 J
3 601 M37 2..
W 2400
-1
min 3800
●
kg 18.0
/ II
mm 355
mm 3
mm 25.4
1 609 92A 531 | (16.04.2019)