Guide To The Serial Copy Management System - Sony MXD-D1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Additional Information
Guide to the Serial Copy
Management System
An MD recorded with digital input cannot be used to
make another recording with digital input. As a digital
audio component, this MD deck conforms with the
Serial Copy Management System standards. The Serial
Copy Management System restricts copies made by
recording digital signal to first-generation copies only.
However, subsequent recording from the second-
generation copy onto another recordable DAT tape or
MD is possible only through the analog input jack on
the DAT or MD deck.
There are three general rules that apply to this unit.
Rule 1
You can record from digital sound sources (CDs, DATs or
premastered MDs) onto a DAT tape or recordable MD via
digital input jack on the DAT or MD deck. You cannot,
however, record from this recorded DAT tape or MD onto
another DAT tape or recordable MD via the digital input
jack on the DAT or MD deck.
CD player
Playing
Optical cable or
coaxial digital
connecting cable
Recording
DAT or MD
Playing
Digital output jack
Optical cable or
coaxial digital
connecting cable
Digital input jack
Recording
42
EN
DAT deck
MD deck
Digital output jack
Digital input jack
DAT deck or
MD deck
v
First-generation
DAT tape or MD
recorded via
digital-to-digital
connection
v
DAT deck or
MD deck
Line (analog) output jacks
Audio connecting
cord
Line (analog) input jacks
DAT deck or
MD deck
Rule 2
You can record the digital input signal of a digital satellite
broadcast onto a DAT tape or recordable MD via the digital
input jack on the DAT or MD deck which is capable of
handling a sampling frequency of 32 kHz or 48 kHz. (This
unit supports 44.1 kHz only.) You can then record the
contents of this recorded DAT tape or MD (first-generation)
onto another DAT tape or recordable MD via digital input
jack on the DAT or MD deck to create a second-generation
digital copy. Note, however, that on some BS tuners,
second-generation digital copying may not be possible.
Playing
BS tuner
Optical cable or
coaxial digital
connecting cable
DAT deck or
Recording
MD deck
v
DAT or MD
v
DAT deck or
Playing
MD deck
Optical cable or
coaxial digital
connecting cable
DAT deck or
Recording
MD deck
v
DAT or MD
v
DAT deck or
Playing
MD deck
Digital output jack
Line (analog) output jacks
Optical cable or
coaxial digital
connecting cable
Digital input jack
Line (analog) input jacks
DAT deck or
Recording
MD deck
Digital output jack
Digital input jack
First-generation
DAT tape or MD
recorded via
digital-to-digital
connection
Digital output jack
Digital input jack
Second-
generation DAT
tape or MD
recorded via
digital-to-digital
connection
Audio connecting
cord

Publicité

Chapitres

Table des Matières
loading

Table des Matières