Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Track numbers may not be recorded correctly
When recording a CD digitally, small extra tracks may be
created due to the contents of the CD recording.
In addition, when track marking is performed automatically
with "LevelSync ON", the track numbers may not be
recorded correctly, depending on the material being
recorded.
"TOC Reading" appears for a long time
If the inserted recordable MD is brand new, "TOC Reading"
appears in the display longer than for MDs that have been
used.
Tracks edited many times may exhibit sound dropout
during playback.
Limitations when recording over an existing track
• The correct remaining recording time may not be
displayed.
• You may find it impossible to record over a track if that
track has been recorded over several times already. If this
happens, erase the track using the Erase function.
• The remaining recording time may be shortened out of
proportion to the total recorded time.
• Recording over a track to eliminate noise is not
recommended since this may shorten the duration of the
track.
• You may find it impossible to label a track while recording
over it.
The correct recorded/playing time may not be displayed
during playback of monaural-format MDs.
Additional Information

Troubleshooting

If you experience any of the following difficulties while
using the unit, use this troubleshooting guide to help you
remedy the problem. First check that the power cord is
connected firmly and the unit is on.
Should any problem persist, consult your nearest Sony
dealer.
CD player section
The player does not start playing
/
A CD is not in the disc tray.
Insert a CD.
/
The CD is inserted label side down.
Place the CD properly.
/
The CD is dirty.
Clean the CD.
/
Moisture condensation has formed inside the player.
Take the CD out and leave the system turned on for
about an hour until the moisture evaporates.
MD deck section
The player does not operate or operates poorly.
/
The MD may be damaged ("Disc Error" appears).
Take the MD out and insert it again. If "Disc Error"
remains, replace the MD.
The player does not start playback.
/
Moisture condensation has formed inside the player.
Take the MD out and leave the system turned on for
several hours until the moisture evaporates.
/
The MD is inserted in the wrong direction.
Slide the MD into the disc compartment with the
label side up and the arrow pointing towards the
opening until the player grips it.
/
Nothing is recorded on the MD (The music calendar
does not appear).
Replace the MD with one that has been recorded.
(Continued)
39
EN

Publicité

Chapitres

Table des Matières
loading

Table des Matières