Sony MXD-D1 Mode D'emploi page 34

To cancel the Erase function
Press EDIT/NO (or CANCEL), p, or turn AMS to change
the track number.
"Erase ?" disappears from the display.
Note
If "Erase!! ?"appears in the display, the track was recorded
or edited on another MD deck and is record-protected. If
this indication appears, press YES (or ENTER) to erase the
track.
Erasing all tracks on an MD
You can erase all recorded tracks, track titles and the
disc title (all information recorded on an MD) at one
time.
Note, however, that once erased, MD data cannot
be recovered.
1
While the player is stopped, press EDIT/NO
repeatedly (or ERASE once) so that "All Erase ?"
appears in the display.
2
Press YES (or ENTER).
All tracks in the music calendar start flashing.
3
Press YES (or ENTER) again.
When the disc title, all recorded tracks, and track
titles on the MD have been erased, "Complete"
appears for a few seconds. All the track numbers
disappear from the music calendar.
To cancel the Erase function
Press EDIT/NO (or CANCEL) or p so that "All Erase ?"
disappears from the display.
Editing Recorded MDs
Erasing a portion of a track
By using the Divide (see page 32), Erase (see page 30)
and Combine (see page 33) functions, you can erase
specific portions of a track.
Example: Erasing a portion of track A
Portion to be erased
Track
1
number
A
Dividing
1 2
A A
#1 #2
Erasing
1 2
A A
#1 #3
Combining
1
A (#1 + #3)
2 3
B C
A is divided
into 3 portions
3 4 5
A
B
C
#3
#2 is
erased
3
4
B C
#1 and #3 are
combined
2 3
B C
31 EN