Textile Maintenance Set; Appliance Parts/Scope Of Delivery; Mode Of Function; Assembly - Dirt Devil VAPORFLEX M3101 Mode D'emploi

4 Textile Maintenance Set

4 Textile Maintenance Set
4.1 Appliance parts/scope
of delivery
2
1
4
3
4
7

4.2 Mode of function

4.3 Assembly

4
Depending on fittings, the Textile Maintenance Set is in-
cluded in the scope of delivery for your Vaporflex.
1 Stand
2 Clamping screw
3 Parking hook
4 Screw-in insert tube (3-part)
5
5 Universal mount
with clothes hook and nozzle holder
6 Textile maintenance nozzle
7 Cotton cover
6
Fig. 16
The Textile Maintenance Set expands the scope of func-
tions on your Vaporflex steam cleaner. It is used to freshen
up different textiles. You can gently remove signs of wear
such as small creases and odours from suits, shirts, trou-
sers and other textiles. It is also particularly capable in ac-
cessing difficult areas (e.g. sleeves).
1. Unpack all accessory parts and check that the contents
are complete.
2. Screw the individual screw-in insert tubes (Fig. 16/4) in-
to each other.
3
3. Screw the clothes hook (Fig. 16/5) onto the upper end
of the screw-in insert tube.
4. Push the stand (Fig. 16/1) onto the lower end of the
screw-in insert tube. Screw the clamping screw
(Fig. 16/2) in tightly.
5. Push the complete screw-in insert tube with parking
hook (Fig. 17/2) into the parking mount (Fig. 17/1) of the
Vaporflex.
1
6. Turn the rod in such a way that the clothes hook
2
(Fig. 17/3) points towards the Vaporflex.
7. Push the textile maintenance nozzle (Fig. 16/6) onto the
handle of the Vaporflex.
Fig. 17
8. Now you can hang the handle into the nozzle holder
(Fig. 17/4).
You can also use the nozzle holder for simply putting
aside the handle during work breaks.
31