Proper Use - NovoPress AFP101 Manuel D'utilisation

Press tools
Please read this Operating Manual carefully.
EN
The safety instructions must be observed!
Compliance with local safety regulations is essential!
2

Proper use

These press tools are intended exclusively for use in press devices manufactured by Novopress
or approved by Novopress, in agreement with the system supplier. If you are uncertain whether
your press device is suitable for the press tools described here, please contact the system
supplier.
The device and the press tools are to be employed solely for the pressing of pipes and fittings
for which these press tools have been designed.
Any use beyond or different to that described here shall be regarded as improper use.
Proper use also includes the observance of the Operating Instructions, adherence to the
inspection and maintenance conditions (see section 7), compliance with pressing cycles and
with the latest versions of all the relevant safety regulations.
Novopress is not liable for damage resulting from
•
•
Warning!
Incorrect or improper use or the use of worn or damaged press tools carries a
risk of injury.
Therefore:
• Press tools may only be used by trained personnel.
• Compliance with the specified service work and service intervals is mandatory.
• Check the press tools for cracks and other signs of wear before each use.
• Discard all press tools with material cracks or other signs of wear immediately and
do not use them any longer.
• Only use press tools that are in perfect technical condition.
Caution!
Unskilled use may lead to damaged or malfunctioning press tools.
• Separate worn press tools immediately and do not use them any longer.
• Use carrying cases for transportation and storage and keep press tools in a dry
room.
• Have damage checked immediately by an authorised workshop.
• Comply with the safety instructions regarding the cleaning and anti-corrosion
agents used.
the use of unsuitable press devices, or
applications that do not conform to proper use.
10