Decommissioning, Disassembly; Decommissioning; Disassemble Receiver - Schluter Systems LIPROTEC LT EBR 1 Notice D'utilisation

EN

Decommissioning,

disassembly

12 Decommissioning, disassembly

Electrical shock is possible in case of improper
disassembly.
Disassembly by unauthorised personnel can lead to a
deadly electrical shock.
Have the component decommissioned and

disassembled by qualified, expert personnel only.
12.1 Decommissioning
Proceed as follows to safely decommission the LIPROTEC
system:
Switch the LIPROTEC system off.

Unplug the power pack's mains plug from the socket.

You can now disassemble the LIPROTEC system's

individual components.

12.2 Disassemble receiver

To disassemble the Bluetooth receiver, proceed as follows:
Loosen the connection cable of the Bluetooth receiver

from the connection terminals of the power pack. To do
this, read the "Directions for using the power pack". If
you use an additional connection cable between the
Bluetooth receiver and the power pack, disconnect the
68
DANGER
Bluetooth receiver directions for use