Repair - Schluter Systems LIPROTEC LT EBR 1 Notice D'utilisation

Fault Cause of
fault
Bluetooth
receiver is
already
connected
with another
end device.

11 Repair

Due to the design, a LIPROTEC component cannot be
repaired.
If a component is defective or losing power, you can

have it replaced with a new one.
Follow the instructions provided in the chapters entitled

"Decommissioning", "Mounting" and "Commissioning"
during this process.
Bluetooth receiver directions for use
Troubleshooting
Sever the connection with the
other device.
Use a remote control in order to
restart the pairing procedure
(see chapter "Setup")
EN
Repair
67