Schluter Systems LIPROTEC LT EBR 1 Notice D'utilisation page 45

EN
Safety
– Adhere to the relevant regulations for electronic
devices at the place of use.
– Adhere to the protection classes of the components.
– Observe the DIN VDE 0100 series of standards
when installing the components.
– Adhere to the scopes of protection in accordance
with DIN VDE 0100-701. Observe country-specific
deviations and the locally applicable regulations.
There is a possibility of electric shocks when installing

components with damaged insulation.
– Mechanical loads may damage the components.
Protect the components from mechanic overload
and damage. Do not use any damaged
components.
Deadly burn injuries or smoke inhalation are possible if

incorrectly laid components ignite.
– Ensure that all components are installed correctly.
– Observe the minimum distances specified in these
instructions.
– Make sure that the components and the connection
cables are sufficiently ventilated.
– Do not use the cable when it is unwound.
– For the components, use a removable panelling.
Swallowing silica gel may cause death by suffocation.

– Keep the silica gel balls and the sealing caps out of
reach of children.
42 Bluetooth receiver directions for use