Basic Safety Instructions - Schluter Systems LIPROTEC LT EBR 1 Notice D'utilisation

Relative humidity for Bluetooth receiver, remote control,

power pack and terminal connections: 45 % to 85 %
Make sure that the scopes of protection according to DIN
VDE 0100-701 are observed when the components are used
in bathrooms or wet rooms.

2.3 Basic safety instructions

2.3.1 Preventing severe and deadly injuries
Electrical shocks are possible when connecting the

power pack.
– Make sure that all work is carried out only by
qualified expert personnel.
– Before connecting the components, make sure that
the power pack's mains plug is unplugged. Wait 10
seconds after unplugging the mains plug.
– Use a professionally earthed protective contact
socket (230 V, 50 Hz) for the power pack's mains
connection.
– Connect the receiver only to a 24 V DC output and
not directly to the mains connection.
There is a possibility of electrical shocks when installing

moist components.
– Only store the components in the closed original
packaging.
– Protect the components from moisture.
– Do not install moist components.
Bluetooth receiver directions for use
EN
Safety
41