Schluter Systems LIPROTEC LT EBR 1 Notice D'utilisation page 50

For optimal operation, we also recommend
installing a light switch upon delivery. This will
allow you to isolate the lighting from the power
supply. Here, the receiver stores the previous
settings and reprograms them when it is
switched on again.
Using the Bluetooth receiver LTEBR1, you can use the
following functions and make the following settings for LED
strips:
Connect one or more LED strips of the LT ES 11, LT ES

21, LT ES 31, LT ES 41, LT ES 51 or LT ES 61 type
Switch the connected LED strips "on/off"

Choose from four default settings for the brightness of

the connected LED strips
Store and retrieve two freely selectable brightness levels

Using the Bluetooth receiver LTEBR4, you can use the
following functions and make the following settings for LED
strips:
Connect one or more LED strips of the LT ES 9 type

Switch the connected LED strips "on/off"

Choose from over 16.7 million colours

Choose from four default settings for the brightness

Choose from eight default settings for the colour

temperature or change it
Store and retrieve four freely adjustable settings for

colour temperature and brightness
Bluetooth receiver directions for use
EN
Description
47