Schluter Systems LIPROTEC LT EBR 1 Notice D'utilisation page 67

EN
Elimination of faults
Fault Cause of
fault
Power pack
overloaded
Cable
connections
are not
firmly
connected
Different Connections
light mixed up
colours
No Remote
reaction to control
button battery is
being empty.
pressed
on the
remote
control
Receiver is
too far away
from the
remote
control.
64
Troubleshooting
Select a larger power pack (up
to max. 200 W)
Check the cable connections for
non-positive locking.
Check that all cable connections
are connected properly. Test
the colours red, green and blue.
Test the colour temperature
warm white to cold white.
Replace remote control battery
(see chapter "Maintenance").
The remote control has a
maximum range of 10 m.
Bluetooth receiver directions for use