ADURO H2 Mode D'emploi page 51

- Inadequate insulation
Electrical connection
Pellet container capacity
1.4 Transportation
When taking your Aduro H2 home, please ensure that it travels in an upright position. The packaging must
be disposed according to national rules regarding disposal of waste.
You are welcome to install your Aduro H2 yourself – but we strongly recommend that you consult your
chimney sweep before you begin the installation. Your dealer can also provide you with installation advice. It
is important to ensure that all local rules and regulations, including ones relating to national and European
standards, are complied with when installing this device. Further, it is important to ensure that the fireproof
tiles and the exhaust deflector in steel is placed correctly. Remember, it is your responsibility that rules in
force are complied with.
You may not begin to use the Aduro H2 until it has been inspected and
approved by your local chimney sweep.
2.1 Position of the hybrid stove/distance requirements
The new Aduro H2 must be installed in a suitable and physically possible position. You need to be sure that
the position complies with local regulations. Distance requirements will only apply if the Aduro H2 is to be
placed close to flammable materials:
Distance to flammable material (see also illustration below)
Behind the stove
15 cm
2. Installation of the Aduro H2
To the sides of the stove
45 cm
2
60 m
230V / 50Hz
Approx. 15 kg
To furniture
87.5 cm
51