Cleaning With The Interdental Brush - Nevadent NSZB 3.7 C4 Mode D'emploi

After use, clean the brush head 1 thoroughly under running water.
♦
Remove the brush head 1 from the handset. To clean the drive shaft 2 and the
♦
handset, hold them under running water for a short while. Hold the handset so that
the drive shaft 2 is pointing downwards at an angle.

Cleaning with the interdental brush

You can use the interdental brush e to clean the interdental spaces, difficult-to-access
parts on the teeth, or the chewing surfaces of your molars.
Attach the interdental brush e to the handset.
♦
Moisten the interdental brush e under running water.
♦
Add a little toothpaste onto the wet interdental brush e.
♦
NOTE
► To avoid splashes, do not switch on the appliance until the brush is in your mouth.
Use the On/Off button 3 to select the desired programme and clean the required
♦
areas.
♦ After two minutes, the toothbrush stops.
After use, clean the interdental brush e thoroughly under running water.
♦
Remove the interdental brush e from the handset. To clean the drive shaft 2 and
♦
the handset, hold them under running water for a short while. Hold the handset so
that the drive shaft 2 is pointing downwards at an angle.
NOTE
The interdental brush e is ideal for cleaning braces or false teeth.
►
│ GB │ IE
■ 10
NSZB 3.7 C4