Using Attachments; Programmes - Nevadent NSZB 3.7 C4 Mode D'emploi

Using attachments

3 brush heads 1, one interdental brush e and one floss attachment 0 are supplied
with the appliance.
To remove the respective attachment pull it upwards and off the drive shaft 2.
♦
When fitting the attachment, ensure that the drive shaft 2 on the handset slides pre-
♦
cisely into the socket on the attachment. Push the attachment down until it completely
covers the drive shaft 2.
NOTE
► We recommend only using original attachments. You can order replacement
attachments at any time (see section Ordering replacement parts).
► You can also use the replacement brush heads for the Philips Sonicare
ultrasonic toothbrush for this appliance.
*Sonicare is a registered trademark of Koninklijke Philips N.V..

Programmes

The toothbrush offers 4 different programmes for your personal dental care regime.
Press the On/Off button 3 repeatedly in the first 10 seconds to select the desired
♦
programme. The LED of the corresponding programme flashes or lights up (see also
the section Clever Start function).
Normal
Sensitive
Whitening
Deep cleaning
NOTE
► If you operate one of the programmes for longer than 10 seconds and then press
the On/Off button 3, the toothbrush will switch off.
► Next time you switch on the toothbrush, it will automatically start in the pro-
gramme you were using last.
│ GB │ IE
■ 8
For thorough cleaning of teeth and gums
For gentle cleaning of sensitive teeth and gums
For whitening the teeth and thorough cleaning of teeth
and gums
For extra thorough cleaning of teeth and gums
©
*
NSZB 3.7 C4