Yamaha F6A Manuel D'installation page 3

PREFACE
This manual contains the information needed
to assemble the Yamaha outboard motor cor-
rectly prior to delivery to the customer. Since
some external parts of the outboard motor
have been removed at the Yamaha factory for
convenience of packing, assembly by the
Yamaha dealer is required. It should be noted
that the reassembled outboards motor should
be thoroughly cleaned, inspected, and adjusted
prior to delivery to the customer.
NOTICE
Because Yamaha constantly strives for product
improvement, the service specifications may be
subject to change in the future. If any change is
introduced into the specifications or assembly
procedures, Yamaha dealers will be notified by
a technical bulletin.
IMPORTANT MANUAL INFORMATION:
Particularly important information is distin-
guished in this manual by the following nota-
tions.
The safety Alert Symbol means ATTEN-
TION! BECOME ALERT! YOUR SAFETY
IS INVOLVED!
WARNING
Failure to follow WARNING instructions
could result in severe injury or death to the
machine operator, a bystander, or a person
inspecting or repairing the outboard motor.
CAUTION:
A CAUTION indicates special precautions
that must be taken to avoid damage to the
outboard motor.
HINWEIS:
NOTE:
A NOTE provides key information to make pro-
cedures easier or clearer.
SYMBOLS USED IN THIS
ASSEMBLY MANUAL
In order to simplify descriptions in assembly
manuals, the following symbols are used:
: Coat with water resistant grease.
(Yamaha grease A, Yamaha
marine grease)
: Specified tightening torque.
: Provide clearance.
: Install so that the arrow mark faces
upward.
: Front ward of the outboard motor.
: Made of rubber or plastics.
: Tighten temporarily.
: Apply locking agent.
LOCTITE
(BLUE LOCTITE)

‚ No. 242
E