Yamaha F6A Manuel D'installation page 14

7. Install:
• Neutral switch 1
• Cap nut 2
Cap nut:
5 N • m (0.5 kgf • m, 3.6 ft • lb)
CAUTION:
Do not overtighten.
8. Install:
• Neutral switch stay assembly 1
• Bolts 2
NOTE:
Be sure to put the shift lever into the forward
position before installing the neutral switch
stay assembly.
9. Install:
• Starter relay stay 1
• Bolt 2
• Lead clamp 3
• Starter relay 4
Bolt:
8 N • m (0.8 kgf • m, 5.8 ft • lb)
10. Install:
• Fuse holder stay 1
• Bolt 2
• Fuse holder assembly 3
11. Install:
• Wire lead (from starter motor) 1
• Battery wire harness (positive) 2
• Bolts 3
Bolt:
3.5 N • m (0.35 kgf • m, 2.5 ft • lb)
CAUTION:
Do not overtighten.
9
E