Wiring Diagram - Yamaha F6A Manuel D'installation

WIRING DIAGRAM

a Start switch
b Neutral switch
c Fuse
d Starter relay
e CDI unit
f Starter motor
g Rectifier/regulator or rectifier
h Ignition coil
i Lead clamp
12. Install:
• Battery wire harness (negative) 1
• Bolt 2
• Ground leads (CDI unit, engine stop
switch and starter relay) 3
• Bolt 4
Bolt 2:
18 N • m (1.8 kgf • m, 13 ft • lb)
Bolt 4:
8 N • m (0.8 kgf • m, 5.8 ft • lb)
13. Install:
• Flywheel cover 1
• Bolts 2
• Start-in-gear protection cable 3
• Fuse puller 4
Color code
Br: Brown
R: Red
11
E