Set-Up Work - Rohm CAPTIS-M Traduction Du Manuel D'utilisation Original

6

Set-up Work

122017 / 1.0
Warning
Crushing injuries and cuts due to start-up during set-up
work.
Flying parts may cause serious injuries.
 Assembly and replacement of parts only in set-up
mode.
 Limit speed in set-up mode.
 Ensure that the machine cannot be put into operation
unsupervised.
 No rotation without workpiece.
 Wear personal protective equipment.
Risk of burns due to hot surfaces.
Burns on hands.
 Do not touch the collet chuck CAPTIS-M when in
operation.
 Allow the collet chuck CAPTIS-M to cool down before
carrying out necessary work.
 Wear personal protective equipment.
Notice
Chuck key not removed.
Ejection of the chuck key.
 Use safety key.
 Always remove the chuck key directly after clamping /
unclamping.
Caution
Set-up Work
79