When Connecting To Separately Sold Power Amp - Pioneer AVIC-X1 Manuel D'utilisation

Connecting the System

When connecting to separately sold power amp

Display unit
13
Subwoofer output
or non-fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
20 cm
Rear output
(REAR OUTPUT)
15 cm
Front output
(FRONT OUTPUT)
15 cm
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
Do not connect this lead to Auto-aerial control
terminal.
Note:
When a subwoofer is connected to this unit instead
of a rear speaker, change the rear output setting in
the Initial Setting. (Refer to the Operation Manual.)
The subwoofer output of this unit is monaural.