When Connecting With A Rear View Camera - Pioneer AVIC-X1 Manuel D'utilisation

Connecting the System
When connecting a Rear view camera
When using this product with a rear view camera, automatic switching to video from a rear
view camera is possible when the gear shift is moved to REVERSE (R) position.
Rear view mode also allows you to check what is behind you while driving.
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE
MAY RESULT IN INJURY OR DAMAGE.
• The screen image may appear reversed.
• The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing
into a tight parking spot. Do not use this function for entertainment purposes.
• The object in rear view may appear closer or more distant than in reality.
• Please note that the edges of the rear view camera images may differ slightly according to whether
full screen images are displayed when backing, and whether the images are used for checking the
rear when the vehicle is moving forward.
☞
See Page 11.
8 m
Extension lead
(for reverse signal)
Fuse resistor
Note:
Do not use other than the
supplied extension lead.
Connection method
15
Hide-away unit
Brown
1. Clamp the lead.
Note:
It is necessary to set to CAMERA in
SETUP when connecting the rear
view camera.
RCA cable
(sold separately)
To video output
Note:
Connect to the rear view camera. Do not connect to
any other equipment.
Rear view camera
2. Clamp firmly with
needle-nosed
pliers.