Pioneer AVIC-X1 Manuel D'utilisation page 11

Display unit
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 6* and
7* when Pin 5 is an aerial control type. In
other types of vehicle, never connect 6* and 7*.
☞
See Page 12.
GUIDE ON
SYSTEM REMOTE
CONTROL
☞
See Page 13.
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Note:
Audio source will be set to mute or attenuate,
while the voice guidance of the navigation
will not be muted or attenuated. For details,
see the "Operation Manual".
Note:
When the auto aerial function is used by connecting
the blue lead to the vehicle with the auto aerial function,
either turning off the ignition switch or detaching the
front panel will retract the auto aerial of the vehicle.
Blue (6*) Blue (7*)
To Auto-aerial relay control terminal
(max. 300 mA 12 V DC).
Note:
Cords for this product and those for other products
may be different colours even if they have the same
function. When connecting this product to another
product, refer to the supplied manuals of both prod-
ucts and connect cords that have the same function.
10