When Connecting To Separately Sold Power Amp - Pioneer AVH-P6500DVD Manuel D'installation

Connecting the Units

When connecting to separately sold power amp

This product
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 6* and
7* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 6* and 7*.
5
Blue/white (6*)
Subwoofer output
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
23 cm
Rear output
(REAR OUTPUT)
15 cm
Front output
(FRONT OUTPUT)
15 cm
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
When you connect separately sold
multi-channel processor (DEQ-P7000)
to this unit, do not connect anything to the
speaker leads and system remote control
(blue/white).
Note:
When you connect DEQ-P7000 to this unit,
separately sold power amp must be connected
to DEQ-P7000.
Note:
Change the initial setting of this product
(refer to the Operation Manual).
The subwoofer output of this unit is monaural.