When Connecting To Separately Sold Power Amp - Pioneer DEH-P8100BT Manuel D'installation

Connecting the units

When connecting to separately sold power amp

Rear output
Front output
Subwoofer output
Antenna jack
6
This product
AUX jack (3.5 φ)
Use a stereo mini plug cable
to connect with auxiliary
device.
IP-BUS input (Blue)
Multi-CD player
(sold separately)
IP-BUS cable
Blue/white
Connect to system control terminal of the
power amp (max. 300 mA 12 V DC).
Blue/white (7*)
Connect to auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Blue/white (6*)
The pin position of the ISO connector will
differ depends on the type of vehicle.
Connect 6* and 7* when Pin 5 is an
antenna control type. In another type of
vehicle, never connect 6* and 7*.
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).