Key To Symbols; Symbols On The Machine - Husqvarna T435 Mode D'emploi

Symbols on the machine:

WARNING! Chain saws can be
dangerous! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter
and on the label.
Both of the operator's hands must be
used to operate the chain saw.
Never operate a chain saw holding it with
one hand only.
Never let the guide bar tip come in
contact with any object.
Use appropriate protections for foot-leg
and hand-arm.
This saw should only be used by
persons who are specially trained
in tree maintenance work. See
operator's manual!
Chain brake, activated (right)
Chain brake, not activated (left)
Air purge.
2 – English

KEY TO SYMBOLS

Refuelling.
Adjustment of the oil pump.
Chain oil fill.
Working position.
Choke.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.