Table des Matières
Publicité
Anleitung BT-PO 110 SPK1:_
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
1. Safety instructions
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Use the polishing machine only in a clean and dry
environment.
The polishing machine should be placed on the
polishing surface before being switched on or off.
Keep children away by taking the appropriate pre
cautions.
Avoid switching on the machine inadvertently.
Do not keep your finger on the switch when
carrying the connected polishing machine from
one place to another.
Always unplug at the mains before changing the
polishing cap or carrying out repairs.
Never carry or pull the machine by its power
cable.
Protect the cable from heat, oil and sharp edges.
Check the cable for breaks before each use.
Do not exert too much pressure when polishing,
but simply allow the polishing machine to glide
over the polishing surface.
Check the housing and switch for damage.
Do not use the polishing machine if the housing or
switch is defective.
the A-weighted equivalent continuous sound
pressure level at the userʼs ear lies below
70 dB(A).
Repairs are to be carried out by qualified electrici-
ans only.
This equipment is not designed to be used by
people (including children) with limited physical,
sensory or mental capacities or those with no
experience and/or knowledge unless they are
supervised by a person who is responsible for
26.11.2007
7:48 Uhr
Seite 7
their safety or they have received instructions from
such a person in how to use the equipment safely.
Children must always be supervised in order to
ensure that they do not play with the equipment.
2. Layout (Fig. 1)
1 Car polishing machine
2 Textile polishing bonnet
3 ON/OFF switch
4 Synthetic polishing bonnet
3. Proper use
The equipment is designed for polishing painted
surfaces of motor vehicles.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Voltage:
Power rating:
Speed:
Polishing pad:
Weight:
Sound pressure level at the
workplace L
Weighted harmonic value a
Totally insulated
5. Care tips
For optimum paintwork protection, you should
polish your car 2 to 3 times a year.
Wash your car at least every 2 weeks. Avoid using
household detergents as these can damage the
paintwork and remove the layer of wax.
230V ~ 50 Hz
3400 rpm
240 mm dia.
:
61,2 dB(A)
PA
:
7,531 m/s
hv
GB
100 W
2.3 kg
2
7
Publicité
Table des Matières
