FLUVO 27113-A Notice D'utilisation page 63

Table des Matières

Publicité

NOTICE D´UTILISATION
6.4
Installation /
Bassin béton avec étanchéité
souple
voir fig. 29 et 30
Détails N voir fig. 30
Enlever la feuille protectrice C (Fig.1) de la
pièce à sceller (21).
Poser l'étanchéité souple (S) jusqu'à ce
qu'elle recouvre env. 30 mm de la bride (J)
de la pièce à sceller (21)
Important:
!
Ne
pas
d'ajustement
l'étanchéité souple (S).
Ne poser l'application de mortier et de
carrelage (M et F) que jusqu'à la bride (J)
de la pièce à sceller (21).
Introduire le raccord (08), les deux joints
toriques (10 et 11) compris, dans la pièce à
sceller (21).
Poser la cloche d'eau (34) sur le raccord
(08).
Indication:
i
Si la pièce à sceller (21)
s'avérait ne pas être installée
exactement à l'horizontale, il
est
possible
position correcte de la cloche
d'eau (34) à l'aide des quatre
vis d'ajustement (05).
Visser la plaque d'assise de la cloche d'eau
(34) sur la pièce à sceller (21) en utilisant
les vis (12) et les rondelles (07).
Schwallduschen / Strahlanlagen / Wasserschirm
Version: 27113 - A
recouvrir
la
vis
(05)
avec
de
régler
la
OPERATOR´S MANUAL
6.4
Installation /
Concrete pool with brush-
applied sealant
see figs. 29 and 30
N For details see fig. 30
Remove protection film C (fig. 1) from the
installation kit (21).
Apply brush-applied sealant (S) up to
approx. 30 mm above the flange (J) of the
installation kit (21).
Important:
!
Do not cover the adjusting
screw (05) with brush-applied
sealant (S).
If required, apply mortar and tiles (M and F)
only up to the flange (J) of the installation kit
(21).
Push the transition piece (08) with the two
O-rings (10 and 11) into the installation kit
(21).
Place the water umbrella (34) onto the
transition piece (08).
Information:
i
If the installation kit (21) has not
been
horizontally,
position for the water umbrella
(34) can be set with the help of
the four adjusting screws (05).
Screw the base plate of the water umbrella
(34) to the installation kit (21) with the help
of the screws (12) and distance washers
(07).
Schmalenberger GmbH + Co.
D-72072 Tübingen / Germany
installed
exactly
the
correct
63

Publicité

Table des Matières
loading

Table des Matières