General Safety Instructions; Safety Instructions For Operation - Husqvarna T435 Manuel D'utilisation

Masquer les pouces Voir aussi pour T435:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

General safety instructions

WARNING:
instructions that follow before you use the
product.
A chainsaw is a dangerous tool if used carelessly or
incorrectly and can cause serious injury or death. It
is very important that you read and understand the
contents of this operator's manual.
Under no circumstances may the design of the
product be modified without the permission of the
manufacturer. Do not use a product that appears to
have been modified by others and only use
accessories recommended for this product. Non-
authorized modifications and/or accessories can
result in serious personal injury or the death of the
operator or others. Your warranty may not cover
damage or liability caused by the use of non-
authorized accessories or replacement parts.
The inside of the muffler contain chemicals that may
be carcinogenic. Avoid contact with these elements
in the event of a damaged muffler.
Long term inhalation of the engine's exhaust fumes,
chain oil mist and sawdust can represent a health
risk.
This product produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical
implants to consult their physician and the medical
implant manufacturer before operating this product.
The information in this operator's manual is never a
substitute for professional skills and experience. If
you get into a situation where you feel unsafe, stop
and seek expert advice. Contact your servicing
dealer or an experienced chainsaw user. Do not
attempt any task that you feel unsure of!
When using this product, a fire extinguisher should
be available.
Keep handles dry, clean and free of oil.
Beware of carbon monoxide poisoning. Operate the
product in well ventilated areas only.
Do not attempt a pruning or limbing operation in a
standing tree unless specifically trained to do so.

Safety instructions for operation

WARNING:
instructions that follow before you use the
product.
This top handle chainsaw is designed specifically for
tree surgery and maintenance in the tree. Due to the
special compact handle design (closely spaced
handles), there is an increased risk of losing control.
For this reason these special chainsaws should be
used only for work in a tree by persons who are
733 - 012 - 08.07.2021
Read the warning
Read the warning
trained in special cutting and working techniques and
who are properly secured (lift bucket, ropes, safety
harness). Regular chainsaws (with wider spaced
handles) are recommended for all other cutting work
at ground level.
Working in a tree requires the use of special cutting
and working techniques which must be observed in
order to reduce the increased risk of personal injury.
Never work in a tree unless you have received
specific, professional training for such work,
including training in the use of safety and other
climbing equipment, such as harnesses, ropes,
belts, climbing irons, snap hooks, carabiners,
etcetera.
Never attempt to catch falling sections. Never cut in
the tree when you are only secured with one rope.
Always use two secured ropes.
During critical felling operations, hearing protectors
should be lifted immediately when the sawing is
completed so that sounds and warning signals can
be heard.
Before using this product you must understand the
effects of kickback and how to avoid them. Refer to
Kickback information on page 12 for instructions.
Never use a product that is faulty. Carry out the
safety checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. Refer to
18 for instructions.
Never use the product with visible damage to the
spark plug cap and ignition cable. A risk of sparking
arises, which can cause a fire.
Never use the product if you are fatigued, while
under the influence of alcohol or drugs, medication
or anything that could affect your vision, alertness,
coordination or judgement.
Do not use the product in bad weather such as
dense fog, heavy rain, strong wind, intense cold,
etcetera. Working in bad weather is tiring and often
brings added risks, such as icy ground,
unpredictable felling direction, etcetera.
Faulty cutting equipment or the wrong combination
of guide bar and saw chain increases the risk of
kickback! Only use the guide bar and saw chain
combinations we recommend, and follow the filing
instructions. Refer to
instructions.
Never start a product unless the guide bar, saw
chain and all covers are fitted correctly. Refer to
Assembly on page 10 for instructions. Without a
Maintenance on page
Accessories on page 30 for
5

Publicité

Table des Matières
loading

Table des Matières