Customer Options Slots; R2E (2Nd Rs-232) Card; Rse (Rs-485) Card; Use(Usb) Card - INFOSEC UPS SYSTEM E6 LCD RT 5000 Manuel Utilisateur

6. Customer Options Slots

6.1. R2E (2nd RS-232) card

 CN1 is for RS232 DB9.
 For communication protocol, please refer to Chapter 2.4.1.
 Installation Position: slot1 (CHA-CN4) or slot 2(CHB-CN5).

6.2. RSE (RS-485) card

 CN1 is for the function of the terminal resistor. Short
pin1-2 to enable the function and short pin2-3 to disable
it.
 CN2 for RS485 and CN3 for remote power.
 Definition
CN2
1 2 3
CN3
1
2
 Installation Position: slot1.
6.3. USE (USB) card
 CN1 for USB.
 Definition
 Comply with USB version 1.0, 1.5 Mbps.
 Comply with USB HID Version 1.0.
 The Pin Assignments of the USE card:
 Installation Position: slot1（CHA-CN3）or slot 2（CHB-CN4）.
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 11 11 AA 68 203 16
1  Ground
2  A/Data+
3  B/Data-
1  AC+
2  AC-
54