Storage Instruction - INFOSEC UPS SYSTEM E6 LCD RT 5000 Manuel Utilisateur

 Make sure the UPS is completely turned off when moving the UPS from one place to
another. It might cause electrical shock if the output is not cut completely.
 The UPS offers CVCF (Constant Voltage Constant Frequency) setting function.
a. For correct setting and wiring, please contact with your local agent.
b. Do not do it by yourself; otherwise, your warranty will be void.
 This UPS has been designed and constructed to protect your assets from the wide range of
power aberrations experienced on Utility power lines today. It is your insurance for reliable,
clean and stable voltage supply. It is worth taking care to install the system correctly and to
have it maintained correctly by your local dealer.
 CAUTION - To reduce the risk of fire, unit input connect only to a circuit provided with
branch circuit over-current protection for 32 amperes for 5 & 6Kva, 45 amperes for 8 kVA and
65 amperes for 10 kVA rating in accordance with the National Electric Code.
 Maximum ambient operating temperature 40C or equivalent

1.2. Storage Instruction

For extended storage through moderate climate, the batteries should be charged for 12 hours
every 3 months by plugging the UPS power cord into the wall receptacle and turn on input
breaker on front panel. Repeat this procedure every 2 months under high temperature
environment.
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 11 11 AA 68 203 16
32