Product Introduction; General Characteristics - INFOSEC UPS SYSTEM E6 LCD RT 5000 Manuel Utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. Product Introduction

2.1. General Characteristics

 True online architecture continuously supplies in your critical device with a stable, regulated,
transient-free pure sine wave AC Power.
 20KHz PWM sine-wave topology yields an excellent overall performance. The high crest
factor of the inverter handles all high-inrush current loads without a need to upgrade the
power rating.
 Multi-functional LCD/LED panel may display various status of the UPS. The LED display may
show UPS working status, Utility Status and UPS Abnormal status, in the meanwhile, the LCD
display may show Input / Output Voltage, Frequency, Load Status, Inner cabinet temperature,
and Abnormal Phenomenon.
 To protect the unit from overloading, it automatically switches to bypass mode in 160
seconds~ 40ms if loading is at 105%~ 150% of rating and in case of overloading at 150% of
rating, it switches to bypass mode immediately. It will automatically switch back to inverter
mode once overload condition ceases.
 Should the output become short-circuit the UPS holds the system and cuts the output
automatically till the short circuit situation is removed manually.
 Should the unit become overheated, the internal thermal Switch will detect the heat and
switch to bypass mode and vice versa.
 Fully digitalized control circuit built in the UPS may upgrade the functionality Of the UPS as
well as reach a high-level protection of the UPS. Through powerful Communication capability
built, it enhances its ability for remote control and monitoring easily.
 Maintenance-free sealed-type battery minimizes after-sales service.
 Maintenance bypass switch (optional) — it provides an easy and safe troubleshooting or
maintenance function when the Utility is normal.
 Providing four different working modes, such as Normal, ECO, CF50 and CF60, it may
widely be used in a variety of applications.
 DC-start function makes sure of the start-up of UPS during power outages.
 Revolutionary battery management circuit analyzes battery discharging status to adjust
battery cut-off point and extend the life of batteries.
 Intelligent temperature-controlled fan may not only extend the life of the fan, but also
reduce annoying noise because of sudden fan spin.
comfortable as usual.
 When UPS is in trouble, you may read out the possible fault reason from the LCD screen
directly, which may reduce down unnecessary repair task a lot.
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
33
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 11 11 AA 68 203 16
It remains your office quiet and

Publicité

Chapitres

Table des Matières
loading

Table des Matières