Bundled Software Installation Guide; Hardware Installation; Software Installation - INFOSEC UPS SYSTEM E6 LCD RT 5000 Manuel Utilisateur

UPS fails to offer
battery backup
or its back up
time is shorter
than its
calculation.
UPS locks itself
and it can't be
turned off.

5. Bundled Software Installation Guide

5.1. Hardware Installation

1. Connect the male connector of RS232 cable to the UPS communication port.
2. Connect the female connector of the RS232 cable to a dedicated RS232 port of the
computer.
3. For optional interface cards, you may refer to Chapter 6 for installation.

5.2. Software Installation

Please refer to the user's manual of the software for installation
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
53
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 11 11 AA 68 203 16
If the backup time is still too short after 8 hours of
charge, please contact your local distributor for
battery replacement.
Please refer to chapter 3.5.6 to trouble shoot the
problem; otherwise, consult your local distributor for
help.
.