Switching
the appliance on
Fig. 2
Press the On/Off button 1. The
temperature warning noise is switched
off by pressing the selection button 4.
The temperature displays 2 flash or
the super display 3 is lit up, until
the appliance has reached the set
temperatures.
When the door is open, the light in the
refrigerator compartment is lit.
Operating tips
When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If you cannot open the freezer
■
compartment door immediately after
closing it, wait 2–3 minutes until
the partial vacuum has equalised.
Setting
the temperature
Refrigerator compartment
Turn temperature controller, Fig. 1/5, to
the required setting.
We recommend a medium setting
(of e.g. 2–3).
Higher settings lower the temperature in
the refrigerator compartment.
Select a higher setting (e.g. 4–5) only
temporarily if:
the ambient temperature is high,
■
door is opened frequently,
■
large quantities of food are placed in
■
the refrigerator compartment.
Freezer compartment
The temperature can be set from –16 °C
to –24 °C.
Keep pressing temperature selection
button 4 until the required freezer
compartment temperature is set. The
value last selected is stored.
The set temperature is indicated on
display 2.
We recommend a factory setting of –18
°C in the freezer compartment.
en
25