Evaluating Results - Beurer BM 57 Mode D'emploi

If a connection to the app cannot be established after
30 seconds, the Bluetooth
blood pressure monitor switches off automatically after
1 minute.
Please note that you must add the blood pressure
monitor in "My devices" in the "beurer HealthMa-
nager" app to enable data transfers. The "beurer
HealthManager" app must be active to allow data
transfers.
If the latest data is not displayed on your smart-
phone, repeat the data transfer as described in
chapter 7.
If you forget to turn off the blood pressure monitor, it will
switch off automatically after a further 30 seconds. In
this case too, the value is stored in the selected or most
recent user memory and the data is transferred if Blue-
tooth data transfer has been activated.
®
• Wait for at least 1 minute before taking
another measurement.

6. Evaluating results

Cardiac arrhythmia:
This device can identify potential disruptions of the heart
rhythm when measuring and, if necessary, indicates this after
the measurement with the symbol
for arrhythmia. Arrhythmia is an illness in which the heart rhythm
is abnormal because of flaws in the bioelectrical system that
symbol goes out and the
®
. This can be an indicator
regulates the heartbeat. The symptoms (skipped or premature
heart beats, pulse being slow or too fast) can be caused by
factors such as heart disease, age, physical make-up, excess
stimulants, stress or lack of sleep. Arrhythmia can only be deter-
mined through an examination by your doctor. If the symbol
appears frequently, please consult your doctor. Only they are
able to determine any arrythmia during an examination.
Risk indicator
The measurements can be classified and evaluated in accord-
ance with the following table.
However, these standard values serve only as a general guide-
line, as the individual blood pressure varies in different people
and different age groups etc.
It is important to consult your doctor regularly for advice. Your
doctor will tell you your individual values for normal blood
pressure as well as the value above which your blood pressure
is classified as dangerous.
The classification on the display and the scale on the unit show
which category the recorded blood pressure values fall into. If
the values of systole and diastole fall into two different cate-
gories (e.g. systole in the ‚High normal' category and diastole
in the ‚Normal' category), the graphical classification on the de-
vice always shows the higher category; for the example given
this would be ‚High normal'.
29